washing machine gets to "drain" point, then stops


  #1  
Old 05-19-05, 01:03 PM
ucdcrush
Visiting Guest
Posts: n/a
washing machine gets to "drain" point, then stops

This is a whirlpool washer. It fills and agitates fine, but when it comes time to drain the water out, it just sits there full of water, doing nothing and seemingly not even trying to do anything.

I've tried rotating the dial slowly to get it to drain, but it just wont.

Any ideas?
 
  #2  
Old 05-19-05, 02:11 PM
G
Member
Join Date: Oct 2004
Location: USA
Posts: 676
Upvotes: 0
Received 0 Upvotes on 0 Posts
Cant say about your machine.
But on a kenmore, I had the bracket that holds the door safety switch rust off preventing the machine from running in the spin mode.
 
  #3  
Old 05-19-05, 04:17 PM
bambiblaster's Avatar
Member
Join Date: Mar 2005
Location: South Central Pa
Posts: 793
Upvotes: 0
Received 1 Upvote on 1 Post
Sounds Like The Lid Switch.... You Can Open Console And Bypass The Lid Switch To Test But If Its Bad Replace It Dont Leave It Bypassed...
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: