I have a frigidaire gallery dryer model #GLER331AS2 that we purchased new a couple of years ago, but just used for the first time today. It worked fine for one load but now the motor only clicks on for a second and the drum won't turn even if I try and turn it manually. I have no idea what's going on with it. My hubby said the belt is intact. Any help would greatly appreciated.

Hey all, I've got a GE Nautilus dishwasher. Lately, we had been noticing the dishwasher leaving little bits of sediment on the top rack dishes. Now it's to the point where it's rendering the dishwasher nearly unusable. I've troubleshooted all over the web and have tried the following: -I've ran an empty load with vinegar -I've unscrewed the filter cover on the top...while I couldn't see in (it was an a bad angle), I felt around and couldn't feel any obvious debris. There was a pool of water in it however. Not sure if that's abnormal or not. -I've checked to make sure the little sprayer tower in the middle is indeed coming up by opening the door mid cycle. -The water temp is plenty hot. -I'm loading it correctly in regards to not over-loading, and not blocking sprayers, etc. -I've experimented with various good, name brand, dish detergents. A new bit of information which might help a diagnosis: tonight, I washed a load that had a lot of raw steak juices on them. After the load didn't clean a lot of the dishes, I ran a second load, and after that finished, ALL of the dishes absolutely reeked of that distinctive raw beef smell. This was the second load after I had washed that stuff. I really can't afford a service call right, and consider myself at least fairly handy, so if anyone can guide me in the right direction to taking care of this problem myself, I'd be much obliged!!!!