I just bought a new GE Frontload Washer and hate it...this is my second front load my other was a Maytag and it was ok. Little did I know, you cant wash small loads, and the typical wash registers 59 minutes but usually takes 130 minutes to wash. I have had 3 service calls and supposedly this is normal and when the clothes dont spin out, the load is not equally balanced. Also when you add bleach to the bleach dispenser make sure the door is closed or it will run all over your floor and if you are lucky you can pour the bleach in the area for bleach and not in the softner container...anybody looking at these machines, ask lots of questions, I think I am done buying front loads.

I just moved into a house that came with this Admiral glasstop electric stove. I plugged it in to use, turned on a burner. The burner got hot, my water was heating up, and then after about 10 seconds the stove started making a beeping sound and where the clock was there was a flashing F1. I hit the stop/clear, the beeping and code stopped. After another 10 seconds, it started again. During this time, the burner stays hot. This beeping with the code happens as long as the stove is plugged in. It doesn't matter if a burner is on or not. I've tried to research this with Google and was directed to this site. Any ideas as to what is causing this?