Kenmore range oven U/S all fuses OK

Reply

  #1  
Old 06-17-08, 07:34 PM
Member
Thread Starter
Join Date: Jun 2008
Posts: 3
Received 0 Votes on 0 Posts
Kenmore range oven U/S all fuses OK

I have an old Kenmore range. The oven doen't work. No light, no heat. All elements work. I checked all the fuses on top of range and in fuse pannel. All fuses fine. What do I check next? Thanks
 
Sponsored Links
  #2  
Old 06-17-08, 10:32 PM
Member
Join Date: Jun 2008
Posts: 25
Received 0 Votes on 0 Posts
Did you just look at the fuses or actually test them?
Turn oven on to bake, Turn up temp dial to 350 or so, test if power ( 240 Volts ) at bake element. If 240 volts at bake element but no heat you have a dead bake element and replace it. If no voltage at bake element get out your schematic diagrahm and test the O/C oven control.
You need to see if there,s power into the oven control , if that's good see if there's power out of the O/C. The test point here would be the 2 wires that are going directly to your bake element or possibly to the broil element then jumpered to the bake element.

Check for 120 volts - 120 volts - 240 Volts at your outlet in the wall.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description:
Your question will be posted in: