Hello, The door latch is broken. Looks like the spring got loose - the latch does not return into initial position after I push it up. I can open/close the door but... it takes some time :) Is it an easy fix? Could you please direct me to the schematic diagram or/and directions on how to fix that. Do I need to worry about anything after I unscrew the security screws on the front door? TIA, Alex.

MAYTAG NEPTUNE FRONT LOAD WASHER MODEL NO. MAH8700AWW SERIAL NO. 11265538GP Everything seems to be working fine until the spin cycle. It will spin, stop, spin, stop every 5 seconds for approx 20 minutes and then spin continuously until cycle is finished but never draining all the water out. Problem is it never reaches it’s full RPM’s so the clothes are still wet causing the dryer to work overtime. One thing I noticed was during the final spin. During the spin, stop, spin, stop, it would sit on 8 minutes remaining for approx 20 minutes before it would start counting down but still never reaching full spin RPM. I have tried using the spin only setting and still sits on 8 minutes remaining for 20 minutes.