GE Dishwasher no upper water from sprayer - low pressure?
#1
04-05-09, 04:16 PM
Join Date: Apr 2009
Location: tucson, az
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
GE Dishwasher no upper water from sprayer - low pressure?
Hi-
thanks for reading this. I have a GE 900 Potscrubber dishwasher, and no water is coming out of the upper sprayer arm. I pulled off arm, and checked for blockage - even used vacuum to suck up some water to ensure that there wasn't any blockage. Am wondering if perhaps the pump isn't producing enough pressure to elevate water to come out of upper (top) spray arm.....any way of checking that?????
dave
thanks for reading this. I have a GE 900 Potscrubber dishwasher, and no water is coming out of the upper sprayer arm. I pulled off arm, and checked for blockage - even used vacuum to suck up some water to ensure that there wasn't any blockage. Am wondering if perhaps the pump isn't producing enough pressure to elevate water to come out of upper (top) spray arm.....any way of checking that?????
dave
#2
04-06-09, 07:17 PM
Member
Join Date: Mar 2009
Location: VA
Posts: 29
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Is their enough water entering the washer? If not the water valve may be your problem. Dishwasher Repair Guide
#3
04-07-09, 09:11 AM
Join Date: Apr 2009
Location: tucson, az
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Hi-
Thanks for the reply, but yes, enough water is coming in. I believe the line to the upper sprayer is blocked - I am trying the "vinegar" approach I have seen elsewhere on this site- I live in Tucson and we have very hard water with lots of calcium......
Thanks for the reply, but yes, enough water is coming in. I believe the line to the upper sprayer is blocked - I am trying the "vinegar" approach I have seen elsewhere on this site- I live in Tucson and we have very hard water with lots of calcium......
