DoItYourself.com Community Forums > Household Cleaning, Kitchen Appliance Service and Repairs > >Electric< Large Kitchen and Home Appliances

Kenmore Portable Dishwasher, 587.1733590 Spraying arm does not turn

Thread Tools

Search this Thread

04-11-09, 08:16 PM

Mrs_D

Member

Thread Starter

Join Date: Apr 2009

Location: New Haven , Connecticut

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

Kenmore Portable Dishwasher, 587.1733590 Spraying arm does not turn

I was given a Kenmore Portable Dishwasher, Model # 587.1733590. It seems that the sprayer arm does not spin and push water to reach the top rack. How do I fix it? What could be the cause?

Upvote

04-14-09, 04:17 AM

daddyjohn

Member

Join Date: Aug 2007

Posts: 1,851

Upvotes: 0

Received 0 Upvotes on 0 Posts

I'm assuming that you hear the pump running?
If the spray arm has not come loose, then you probbaly need to replace the pump impeller. It comes as a kit.
Part # 5300809909
Sears -$25
Ebay $12 to $25
Easy DIY job

Last edited by daddyjohn; 04-14-09 at 04:20 AM. Reason: add text

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

>Electric< Large Kitchen and Home Appliances
kenmore 110.66722692 doesnt keep heat

S

stixs099 on Apr 11, 2009

my kenmore dryer when it starts the element heats then shuts of after 1 min or 2 then kicks back on after 3-4 mins then shuts back off after another min or 2 tested the thermal cutout is good no breaks in the heating element is their away to test the high limit thermostat i believe this is the problem but not sureRead More
>Electric< Large Kitchen and Home Appliances
Maytag LA8650 Washer - Grinding/Scraping/Rattle Noise During Spin Cycle

C

carol2 on Dec 19, 2008

If you want to cut directly to the chase, here is a link to the video (detailed description of problem below): [url=http://www.youtube.com/watch?v=mWWD7fKdQEs]YouTube - Maytag LA8650 Washing Machine[/url] I have a Maytag Model LA8650 Washer that I purchased in 1991. It has never given me a day's worth of trouble until recently. During the spin cycle, it makes a terrible grinding/rattling/scraping sound. Sometimes it sounds like there are loose metal parts rattling around (like loose bearings or something), but not all of the time. It also seems to get off-balance very easily - even when the load [I]is balanced [/I]. In the video, it gets off-balance even with nothing in the washer. The rasping sound is intermittent as you can hear in the video. Then it makes a different sort of grinding/rattling/scraping sound as it stops spinning. I checked the belts underneath and they seem fine. I can turn the belts by hand. I can find no evidence of any leaks. It washes clothes fine, does spin, and does drain the water fine. It doesn't leap or bang around. The only problem is that it makes that horrible noise during the spin cycle and stopping the spin cycle and both noises are definitely different/new than in the past. I took video of it in the spin cycle and stopping so that you can hear the noises. I removed the front panel so you can see inside, too. Near the end of the video, I turn off the spin so that you can hear the scraping noise it makes as it comes to a stop. (There is a small crashing sound early in the video that is unrelated to the washer - I lost my balance and bumped into some plastic shelving. :( ALL other noises in the video are from the washer - not my shoes or anything.) Please see some still photos and link to the video below. I sure would appreciate any help. Thanks very much! Carol Link to video: [url=http://www.youtube.com/watch?v=mWWD7fKdQEs]YouTube - Maytag LA8650 Washing Machine[/url] [IMG]http://i20.photobucket.com/albums/b242/Mangorunner/11Large.jpg[/IMG] [IMG]http://i20.photobucket.com/albums/b242/Mangorunner/12Large.jpg[/IMG] [IMG]http://i20.photobucket.com/albums/b242/Mangorunner/13Large.jpg[/IMG] [IMG]http://i20.photobucket.com/albums/b242/Mangorunner/14Large.jpg[/IMG]Read More

Ask a Question