Hello, we have a GE Potscrubber 650 that is now only getting a dribble of water to come out of the arms. I would say it's only maybe half an inch high of water thats coming out. Since its getting water is that an indication that the selenoid is working and that there could be either a leak or it could be clogged somewhere? And there is a horrible smell coming from the inside. And from what we can tell there is not much in the way of food particles on the inside. Any and all help would be most appreciated! kew

Problem: ~5 yr. old Frigidaire Gallery ES 200/300 gas stove sealed surface burner leaks and cooktop non-removal: Front, right burner [I](the largest of the four burners, plus possibly the small burner behind it) [/I]must be leaking LPG under the cooktop because when the burner gas is on and lit I can smell gas, then, after minute or so, the flame sucks down under the cooktop and the accumulated gas ignites with a [FONT="Comic Sans MS"]whoosh-boom[/FONT]. I want to look under the cooktop but the owner manual says "[FONT="Fixedsys"]The cooktop is not removable. Do not attempt remove or lift the cooktop.[/FONT]" Is there a way to remove the top without damaging the stove? And of course get it put back together again...