DoItYourself.com Community Forums > Household Cleaning, Kitchen Appliance Service and Repairs > >Electric< Large Kitchen and Home Appliances

GE Profile Prodigy Washing Machine No Power

Thread Tools

Search this Thread

10-27-09, 03:26 PM

rflegal12

Member

Thread Starter

Join Date: Oct 2009

Location: CT

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

GE Profile Prodigy Washing Machine No Power

Hello:

I have a GE Profile Prodigy washing machine, Mod #WNSE4200AOWW and does not power up at all, no lights or sounds. There is power in the outlet and I have tried upplugging and replugging the power cord into the outlet several times and still nothing. The last thing it did was that all the LEDs on the front panel came on at the same time for about a second and then went off. Is there an internal fuse or a relay that I can replace? It is the control board? Please Help!

Upvote

10-27-09, 04:54 PM

pugsl

Forum Topic Moderator

Join Date: Mar 2008

Location: United States

Posts: 8,161

Upvotes: 5

Received 77 Upvotes on 70 Posts

open consul there is a tech sheet it should have test for controls there. Think you will need a new control board.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

>Electric< Large Kitchen and Home Appliances
Kenmore Washer 11044932202 Loud Noise

G

gypsyrose on Oct 26, 2009

My washer (6yr old front load)functions properly except for the spin cycle. I have a very loud banging noise but only when the spin cycle reaches the highest RPM. The noise is loud enough to run ya outta the house. I took the back panel off did a visual inspection....nothing looks broken and sounds like the noise is coming from the pulley shaft. Are there bearings behind the pulley? Are they replaceable or do I have to purchase the entire outter tub assembly. thanks:wall:Read More
>Electric< Large Kitchen and Home Appliances
Kenmore Series 80 Washer wont spin

T

Thonati on Oct 26, 2009

Hi guys, First time here in appliances. I ususally hang out in the electrical forum. But I have and easy one (I think). Kenmore Series 80 Washer Model: 110.24872300 Serial: CP3937236 Here is events: 1) Water fills correctly 2) Agitates properly and on time 3) Drains perfectly 4) Motor is humming but it wont spin I removed the agitator, motor and drive shaft. I inspected the clutch. There does not seem to be any issues. The plastic piece is ok and locks into cam fine. Cam rotates fine and unlocks breaks. Tub spins freely (no obstructions). The shaft has no wear. The coupling is ok, nothing worn or broke. The issue is with the drive block. It appears that there was "pegs" or "posts" (that lock into agitator???) There are metal shavings on the column and now on bottom of tub and on the inside of the agitator. I think drive block needs replaced. Does this seem logical? is there a schematic? is it worth repairing? how many beers will it take for me to fix? if it is more than a six-beer job than it is not worth my time. This was given to me by a neighbor who was throwing it away anyways. She bought a new one.Read More

Ask a Question