DoItYourself.com Community Forums > Household Cleaning, Kitchen Appliance Service and Repairs > >Electric< Large Kitchen and Home Appliances

Removing Front Panel--Kenmore Electric Dryer

Thread Tools

Search this Thread

10-29-09, 11:03 AM

Rocky4052

Member

Thread Starter

Join Date: Oct 2009

Location: Ma.

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

Removing Front Panel--Kenmore Electric Dryer

Hi--This is my first time here. I have a Kenmore Model# 110.96375100. How do you remove the front panel? It is one piece--(no separate bottom panel) I need to look for vent blockage and check heating coil........... It does not get hot enough and runs forever...........Thanks

Upvote

10-29-09, 11:43 AM

greynold99

Member

Join Date: Nov 2006

Location: US

Posts: 320

Upvotes: 0

Received 0 Upvotes on 0 Posts

Reply to Rocky

Rocky,
Try Fixitnow.com Samurai Appliance Repair Man: DIY Appliance Repair Help, Appliance repairs, Appliancehelp, Appliances, repairs to dryers washers dishwashers fridges repairs microwaves ge maytag kenmore frigidaire westinghouse inglis, appliance how to take apart information, purchasing an appliance help, model number help, -- some real good information and access to tear-down schematics at both sites.
Greynold99

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

>Electric< Large Kitchen and Home Appliances
Maytag Neptune Washer, won't spin???

R

rich1969 on Oct 28, 2009

Hello, I have a Maytag Neptune Washer Model #MAH4000AWW. First, I'd like to give a brief history about this machine. Ever since we first bought & first started using it the door lock light would not come on but, the delay wash light came on instead. So we tried using the delay wash & the door lock light came on instead of the delay light until the door locked then both lights were on. So, I just assumed the factory got the wires mixed up in the control panel nothing to worry about & not really a need to call for warranty service. I was purchasing the extended warranty for the first 3 or so years from Maytag, but it got too expensive to continue & I dropped it about 2 or 3 years ago. Now, we have the following problem. All cycles run fine except the spin cycle. When it's in the spin cycle, it drains & turns back & forth as if it were still in the wash cycle. I've tried all spin cycles & they all do the same. Also note, the delay light I mentioned above does not light up anymore when the machine is running. Could this be a problem I can fix myself? I welcome any feedback. Thank you in advance. -Rich...Read More
>Electric< Large Kitchen and Home Appliances
Kenmore refrigerator Forzen drainage

R

Rajan on Oct 29, 2009

Hi, The Fridge is 6 years old ,the drainage in the frozen section gets clogged with water and then freezes as an solid ice. Once the water is formed during the defrost cycles ,it starts collecting below the lower trays and then freezes once the drainage is blocked with the ice.After each defrost cycle the water starts collecting over the ice and makes it impossible to use the lower trays Every 30 days we have to defrost the system manually and clean up the drain , remove complete ice from the trays and the drainage. Can any body suggest a solution,twice I have changed the electromagnetic valves which controls the water flow in and out to the ice maker and the drinking water outlet. Regards RajanRead More

Ask a Question