DoItYourself.com Community Forums > Household Cleaning, Kitchen Appliance Service and Repairs > >Electric< Large Kitchen and Home Appliances

Kenmore oven not reaching temperature

Thread Tools

Search this Thread

01-06-14, 01:14 PM

crabbe33

Member

Thread Starter

Join Date: Jan 2014

Location: USA

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

Kenmore oven not reaching temperature

I have a kenmore utra bake oven model 655.95154300 and the oven is not reaching the desired temperature. Does anyone have any idea what it could be? I keep thinking thermostat but I have no knowledge about ovens.

Upvote

01-06-14, 10:21 PM

PJmax

Group Moderator

Join Date: Oct 2012

Location: Jersey

Posts: 63,113

Upvotes: 447

Received 3,612 Upvotes on 3,238 Posts

Welcome to the forums.

I'm assuming this is an electric stove as I can't locate any info on the model number you left me. Can you double check it ?

There is a temperature sensor mounted in the back of the over that tells the thermostat what the oven temperature is. That could be defective.

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

>Electric< Large Kitchen and Home Appliances
GE Dishwasher not draining

H

hmhill17 on Jan 02, 2014

I've checked the strainer at the bottom. I've use a shop-vac to suck out all the water multiple times. As far as I can tell, there's nothing in the drain line, but I didn't pull it out completely and clear it because that would be a major pain. I did notice that the drain line connects to the normal drain under the sink and not the disposal, but that doesn't really concern me since there's no backup in the sink. Tried baking soda and vinegar after reading some stuff online, but all that did was foam up the bottom. The dishwasher is probably the one they stuck in when they built the house. Main reason I'm posting is to look for a simple solution I haven't found Googling. With MLK sales coming, I might buy a new one, but I don't really want to deal with two weeks of sucking water out of it if I don't have to.Read More
>Electric< Large Kitchen and Home Appliances
Wirlpool washer won't fill keeps draining

J

jthafe on May 08, 2005

I have a Wirlpool Heavy Duty washing mashing, model LA5550XTW0 that has all of the sudden started to continue to drain regardless of water temp or size of load instead of filling. It's like there's a valve that just doesn't close so the water runs right through it to the drain. I've had it completely drain my hot water heater several times. Most of the time if I turn it off and on several times and maybe let it go through a few seconds of part of a cycle whether it's agitate, rinse, spin or whatever it will start to hold the water and I'm able to use it, but occasionally after the water from the agitate cycle drains and it's gone through the first spin cycle and it starts to try to fill for the rinse it will develope the same problem where it won't hold water and just lets it all drain out :wall: . Is this something that can be fixed? I'm not concerned about ease, I'm savvy with my tools, I just know alot more about cars and computers, but would like to do this if I can. Please advise. I'm not sure if it's a direct drive or belt drive. I read in a thread that I can't seem to locate that one has a solid back piece and one has an access panel. Mine has the solid back.Read More

Ask a Question