Kenmore 800 series washer won't spin in the last spin cycle

Reply

  #1  
Old 05-31-14, 02:27 PM
T
Member
Thread Starter
Join Date: May 2014
Location: United States
Posts: 1
Received 0 Votes on 0 Posts
Kenmore 800 series washer won't spin in the last spin cycle

The washer would only spin sometimes in the last spin cycle. I would have to open and close the lid in order to get it to spin again. So I thought it was the lid switch so I bypassed it and did about 3 loads of wash and it seemed to be working fine. Now it just sits in the spin cycle making a humming noise and won't spin. Any idea on why it's back to not spinning or what I should try next?
 
Sponsored Links
  #2  
Old 05-31-14, 04:12 PM
pugsl's Avatar
Forum Topic Moderator
Join Date: Mar 2008
Location: United States
Posts: 9,029
Received 74 Votes on 67 Posts
Look inside cabinet about 6 inches from floor you you may see a streak of oil. If there you need a gearcase top seal, clutch and drive coupler. lean washer back against wall to look under it.
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: