GE top loading machine, noisy with excessive movement of tub
#1
Member
Thread Starter
Join Date: Jul 2014
Location: USA
Posts: 38
Upvotes: 0
Received 0 Upvotes
on
0 Posts
GE top loading machine, noisy with excessive movement of tub
I have a 10 year old GE top loading washer (WBSR3140D5WW). It is very noisy during both washing and spinning cycles, even though it gets the job done. The tub seems to be very loose when I try to push it around by hand. I checkout the damping straps and springs, all seem to be in their proper place.
Here is a video of the washer during washing cycle, seem very noisy
Washer washing - YouTube
Here is a video of me pushing the tub around by hand, is the degree of freeplay here excessive?
WP 20140711 013 - YouTube
Appreciate the help.
Here is a video of the washer during washing cycle, seem very noisy
Washer washing - YouTube
Here is a video of me pushing the tub around by hand, is the degree of freeplay here excessive?
WP 20140711 013 - YouTube
Appreciate the help.
#2
The noise and movement sound and look normal to me. Make sure the 4 rubber straps on top are not broken. Tub hangs from 4 rods and swings free.
#3
Member
Thread Starter
Join Date: Jul 2014
Location: USA
Posts: 38
Upvotes: 0
Received 0 Upvotes
on
0 Posts
The four damping straps are all in place. I took one off, see picture below. It looks normal to me, I am not sure at what point they are considered to be worn or stretched out. Any thoughts?