Hi all, I have an LG LD-14AW3 dishwasher which will work until right at the end when it's draining, when it will throw up an 'OE' error (not fully drained within 5 mins). I have checked & the drain hoses are clear, and have pulled out the drain motor and turned it on in the service mode, seems to be turning properly at decent speed with no slippage of the propeller blades. Also the water will drain from the end of the drain hose, but not within the 5 minutes. What I have noticed is that the water will back-feed into the dishwasher (at a steady trickle) when on a drain cycle, through the plastic 'air guide' on the left hand side of the dishwasher. This is the clear plastic unit which the drain hoses plug into, almost seems like it has a leak in one of the water passages inside it? Has anyone experienced this before..? Cheers for any help.

Hi, all! I have a Fisher & Paykel refrigerator Model E522B with the freezer on the bottom. I have the temp controls set as low as they go but the temp in the refrigerator section won't go below 40 degrees. The freezer section will make ice, but ice cream stays mushy. Everything appears ok, vents open and clear, the fan's working, the compressor works and everything is clean and free of dust. What's the problem? Is there another temp adjustment in the control box in the back or is it a bad temp sensor? Thanx!