Commerical maytag washer
#1
Commerical maytag washer
I have a commercial washer that stops at the deep rinse cycle I have replaced the timer but still does the same stops at the deep rinse cycle I have also jumped out the lid switch but still does the same I am lost what to check next
I have access to all the parts can you help me check the next step indecently
I have two washers doing the same thing
Thanks Danny258
I have access to all the parts can you help me check the next step indecently
I have two washers doing the same thing
Thanks Danny258
Sponsored Links
#4
I have 10 washers and two out of them stop at the Deep rinse cycle Model # MAT15MNAWWO
#5
MAT15MNAWWO I have checked the cold water in both washers its ok
#6
They say Maytag on them built built by Whirlpool. Most Whirlpool parts will fit them (usually cheaper). Just for your info. Not a common problem but sounds like timer. Here is a diagram of your washer
MAYTAG WASHER Parts | Model MAT15MNAWW0 | Sears PartsDirect
Google timer parts # and only buy from a seller that as a year return policy. I can't be sure it's the timer
Here is the timer part # W10130353
MAYTAG WASHER Parts | Model MAT15MNAWW0 | Sears PartsDirect
Google timer parts # and only buy from a seller that as a year return policy. I can't be sure it's the timer
Here is the timer part # W10130353
#8
Thanks I found the problem it was the cold water solenoid was bad Thanks
#9
Thanks I found out the cold water solenoid was bad thanks for your help
«
Previous Thread
|
Next Thread
»