Kenmore Washer Drip Near Lid
#1
Member
Thread Starter
Kenmore Washer Drip Near Lid
Kenmore Model 110.26632500
My washer has a small drip into the tub from just behind the lid. I unplugged it for a day and its still there. Its a small amount but I'm afraid it could worse when not home.
Any suggestions would be appreciated.
My washer has a small drip into the tub from just behind the lid. I unplugged it for a day and its still there. Its a small amount but I'm afraid it could worse when not home.
Any suggestions would be appreciated.
#2
Your model # did not work. Usual reason for a drip into tub back there is you need a fill valve. Yes it will get worse if you let it go.
#3
Member
Thread Starter
thanks you very much for the reply
PS I did try the washer number on a few parts sites and it does work
PS I did try the washer number on a few parts sites and it does work
#4
We use Sears parts direct and some times the decimal needs to removed.
sears parts direct/model-number/11026632500
The fill valve would be OEM part # 3952164
Can be seen as pictorial part # 26 under "Rear Panel Parts" tab.
sears parts direct/model-number/11026632500
The fill valve would be OEM part # 3952164
Can be seen as pictorial part # 26 under "Rear Panel Parts" tab.