Broke tacho coil wires connector

Reply

  #1  
Old 04-25-19, 11:58 PM
Member
Thread Starter
Join Date: Apr 2019
Location: Netherlands
Posts: 2
Broke tacho coil wires connector

Hello,

Yesterday I broke the 2 wires of the tacho coil (the 2 wires that go into the coil). Is there a way to solder back the 2 wires in the coil.I cut a little of the plastic housing, and inside a side wires going through. Are those wires connected to each other, or is there a begin and an end?Thanks in advance!
 
Attached Images  
Sponsored Links
  #2  
Old 04-26-19, 04:21 AM
Member
Join Date: Oct 2015
Location: Ct.,USA
Posts: 1,033
Likes Received: 13
Yellow wires can be soldered. Coil wires usually use crimp/friction connections due to the high heat melting any solder.
 
  #3  
Old 04-26-19, 04:34 AM
Member
Thread Starter
Join Date: Apr 2019
Location: Netherlands
Posts: 2
the coil looks like this at the moment. how should i fix the 2 connectors to the coil?
 
Attached Images  
  #4  
Old 04-26-19, 09:20 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 50,967
Likes Received: 155
Welcome to the forums from overseas.

Unfortunately that coil is not repairable. It is a coil wound of one long piece of very thin wire. The two ends are led out to that plastic block where the connection wires are attached.

Name:  coil.jpg
Views: 15
Size:  9.2 KB
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes