Spindle/shaft for an LG washer #WM2101H* or compatible
#1
Spindle/shaft for an LG washer #WM2101H* or compatible
I might have ruined my spindle/shaft while trying to dislodge it from the drum assembly. If you have a spindle/shaft (the part that protrudes from the spider) for an LG Washer Model #WM2101H* or Compatible Models, I can use it. Please post a reply on how to contact you or- if the diy site has a private message feature -send me a message through the diy forum and I'll get back to you. Thanks in advance!
#2
Google part # or I found this on E bay https://www.ebay.com/p/LG-Washer-Tub-Support-Spider-Arm-4434er0002a-4434er0002d/21005225049?iid=254299962736&chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=254299962736&targetid=484370304639&device=c&mktype=pla&googleloc=9009736&poi=&campaignid=1498362366&mkgroupid=60383707320&rlsatarget=aud-674323409261la-484370304639&abcId=1139456&merchantid=137698768&gclid=CjwKCAjw7uPqBRBlEiwAYDsr13osAmquhRVemaEx5oHZiPh5HjFuzXyzt-wP__rIHbHdsZl0qPlbLBoCBbIQAvD_BwE
Here is the part # to google There are plenty out there.
4434ER0002A
Here is the part # to google There are plenty out there.
4434ER0002A
#4
Since you have the tub out did either the front or rear 1/2s have any damage. I have seen them all torned up.
#6
I was asking about the front or rear haft of the tub was damaged. Happens a lot when bearing go bad.
#7
The tub doesn't appear to have been damaged at all. The top of the shaft/spindle is damaged, but the spider itself is fine. I'd like to just be able to get a new spindle/shaft without having to get the entire spider as well.