Microwave vent thru-the-wall installation

Old 02-04-20, 11:40 AM
Thread Starter
Join Date: Feb 2020
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Microwave vent thru-the-wall installation

The back wall is an exterior, load-bearing wall of this two-story home. There is a stud one inch in from the left edge of the 12 template, dead-center of the 10th inch of the 3.5 X 10 duct. There may be 6 between the front of the drywall and the stucco lath. Is there any way to modify the wall vent and MW vent adapter in order to bypass this stud?

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: