Space Heater Tip-over Switch?

Reply

  #1  
Old 02-27-20, 02:59 PM
A
Member
Thread Starter
Join Date: Feb 2020
Posts: 2
Received 0 Votes on 0 Posts
Space Heater Tip-over Switch?

Hi there! I have a Honeywell hce232v ceramic heater. It keeps giving me a E1 error code, like every few minutes! To the point that it is pointless to have on. From what I gather this means the tip-over switch is malfunctioning and it thinks itís tipped over when it is not.
Is this something I can fix?
Iíd really love to fix this rather than get a new one. I took the back off, but I have idea what any of the parts inside are or how I could fix this issue.
Iíve attached a photo of what I found inside.

Thank you in advance for your help! [img]blob:https://www.doityourself.com/371152b3-bd68-4231-a017-3e50659c7a08[/img]
 
Sponsored Links
  #2  
Old 02-28-20, 12:33 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 57,774
Received 932 Votes on 869 Posts
Welcome to the forums.

There's a good chance the tip sensor is stuck in the tipped position.
You may be able to just tap it to reset it.

That picture link is the location in your phones browser where the picture is. It hasn't left your phone. You can either post that at a hosting site and link it here or load pictures directly to the board.
How-to-insert-pictures.
 
  #3  
Old 03-09-20, 07:54 AM
A
Member
Thread Starter
Join Date: Feb 2020
Posts: 2
Received 0 Votes on 0 Posts
Any chance you can help me identify which part is the tip over switch?

Pictures should be attached this time.

Thanks!
 
Attached Images   
  #4  
Old 03-09-20, 11:14 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 57,774
Received 932 Votes on 869 Posts
The only thing visible that could be what you're looking for is that taped object cable tied
to the black power cord. Remove and see what's under the tape.

I was thinking further..... if the electronics knows when it's tipped it can't be that part on the power cord. That part is probably a thermal fuse. That means whatever detects the imbalance may be on the back of that board or on the back of the display board.

Honeywell tower heater
 

Last edited by PJmax; 03-10-20 at 12:02 AM.
  #5  
Old 03-10-20, 04:34 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 23,052
Received 533 Votes on 490 Posts
Just to be clear, the right hand side of your photos is towards the top of the heater while the left side is to the floor? Is there a small hole or pin protruding from the bottom of your heater?
 
  #6  
Old 03-10-20, 07:51 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 57,774
Received 932 Votes on 869 Posts
That's one of those oscillating heaters. I'm pretty sure the motor and drive are towards the floor. That would mean the right side of the pictures is down. The power cord is brought up thru the center of the swivel.

Now that I'm looking again..... I see the display/switch board is at the top and the control board is down towards the bottom. That means that switch you are looking for is at the top.
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: