DoItYourself.com Community Forums > Electrical, AC & DC. Electronic Equipment and Computers > Electrical - AC & DC

The best second job

Thread Tools

Search this Thread

08-18-02, 01:33 AM

grasscarp

Visiting Guest

Posts: n/a

The best second job

America On Line Watch Out!!!

You have the opportunity to enroll FOR FREE in a new online community that PAYS YOU TO BE A MEMBER andwere not talking peanuts.

You can do this without disturbing your activities!

How does $10,000 a month sound just for using their community?

http://www20.brinkster.com/mybs/
http://mytopcity.topcities.com/

There is a new sheriff coming to town and their focus is to be bigger and better than AOL.

Going Platinum is developed by 250 professionals who ALL have Master Degrees in computer science. They spent the past 2 years in a "Think Tank" in the middle of the Siberian Desert constructing this new community and what you will be introduced to WILL BLOW YOUR MIND!

Anderson Consulting, the worlds largest advertising company has taken on the duties of spreading the word and they will be doing this in a BIG WAY!!!!

Were talking T.V., Radio, Billboards, Newspaper, and magazines. They will be blasting it EVERYWHERE which will include internationally.

Next thing to know is that Going Platinum is owned by MAJOR companies such as MCI WorldCom which means to you and me that they have the FINANCIAL BACKING T to pull something like this off.

If you had a chance to be in at the beginning of America On Line and the chance to buy into the company you would have made a HUGE amount of money. Well, here is your chance to get in on the ground floor and it will cost you nothing!!!!

GO ENROLL NOW!!!!!

http://www20.brinkster.com/mybs/
http://mytopcity.topcities.com/

JUST A FREE SIGN UP, GO ENROLL NOW!!!!!!!!!!

Upvote

08-18-02, 07:42 AM

Wallpaper

Member

Join Date: Jan 2002

Location: Virginia Beach, VA

Posts: 600

Upvotes: 0

Received 0 Upvotes on 0 Posts

It's a trap!!!

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Electrical - AC & DC
Phone jack not working

L

lefty3 on Aug 17, 2002

I recently moved into a house where all the jacks are working except the one in the MBR. When I took the cover off, 2 of the wires from the plug to the screw were broken. I purchased another unit just like the one there, wired it in, and I still don't get a dial tone. If it means anything, in addition to no dial tone, when I blow into the phone mic there is no noise in the earpiece. There is one grey cable coming out of the baseboard with 4 wires (black, yellow, red green). The wires are on the same screws as the jack in the 2nd BR that works. I've taken the (corded) phone to a working jack and I get a dial tone, so it's not the phone or wire coming from the phone. Of course, of all the jacks in the house, this is one of the few for which the grey cable runs into the wall instead of on top of the baseboard. Is there any way I can trace/fix this problem without going into the wall? Thanks, BethRead More
Electrical - AC & DC
3 Way switch screw-up

P

PsyGrad on Aug 17, 2002

In my garage there is a 3 way switch, one at the entry door, and one at the exit door, all of which controls a light in the center of the room. The switch box at the entry door is just a regular 3-way switch. The switch box at the exit door, in my opinion was a mess. It had 4 - 3 wire (ground, hot, and neutral) insulated wires coming in to it, a 5th - 4 wire (switch, ground, hot, and neutral) coming in to it. This was a double gang box with two switches, one was the second half of the three way switch, and the other switch just operated a light outisde the garage. Also off that there was an outlet connected to it. I thought this to be a dangerous situation which I wanted to rectify. SO, what I did is I took the whole thing apart, I determined what was the insulated 4 wire for the 3-way switch and connected all black to black, white to white, and ground to ground, stuffed that in to a box, then ran a 4 wire leg to a double gang switch box one of which operates the three way switch (of which I bought a new 3-way switch, and another for the outlet ( I left the outside light hot all the time because it's on a dusk/dawn motion sensor) Now here's the problem, I can't get the 3-way to work correctly. It will switch on and off from certain positions, like if I have the switch on at the entry door I can switch it off from the exit door, but if I have it off from the entry door, I can't do anything from the exit door. I connected the black to where the switch said to (at the bottom), and the switch wire at the top. If I connect the white it will trip the breaker. If I don't it works as stated before. If I reverse the switch and the hot, it still works as stated before, and if I connect the white it does nothing. What did I do wrong, and how can I fix this screw up?Read More

Ask a Question