I'm having a problem with my door openers. They are new this summer, I installed them (replacements). Since they were put in, They both will intermittently not work with one switch device or the other. They both have a wired (indoor) and a wireless (outdoor) transmitter, as well as the car visor transmitters. It doesnt happen every time either. If it doesnt open with the wireless transmitter, then i have to hit the wired trans, and it will open. If it doesnt work with the wired trans, i have to hit the wireless trans and it will open. It is kind of like it has to reset itself with the other transmitter before it will work again. There is also a led light on the wired trans, that will goo out after you press it the first time, then it will come back on obviously after you reset it with the other trans. Any suggestions or advice. I have looked at the wiring and it seems fine. This is driving my wife nuts!! Thanks alot

I am remodeling my kitchen. I have replace most of the electric, brought everything up to code. There is one gfi outlet supplied from old AC cable. it also supplies an outlet another outlet through the gfi. It trips when I try to connect the receptacle to the metal box! What is wrong? Thanks alot