emt - securing wire at box

Old 08-29-04, 05:38 AM
Visiting Guest
Posts: n/a
emt - securing wire at box

I'm using 14 ga THHN (4 conductors plus one ground) in 1/2" EMT with offset fittings to connect to the boxes. What I don't see is how to secure the wire at the box. The offset fittings don't have any sort of device that would clamp the wires and I didn't see anything in the EMT fittings section at Home Depot that would do the job. Please let me know what I need to do to secure the wire where it enters the boxes.
Old 08-29-04, 05:47 AM
Speedy Petey's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Nov 2003
Posts: 2,262
Upvotes: 0
Received 0 Upvotes on 0 Posts
No need to secure the wire. In fact there is no way to.

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: