Old 04-27-08, 08:13 PM
Thread Starter
Join Date: Apr 2008
Posts: 22
Received 0 Votes on 0 Posts

here is the situation. im building a house with a detached garage. i built the garage before the house as tool storage while i built house. rather than install a tempoarary, the PC allowed me to put my service entrance and panel(200A) on the garage.( the garage actually attaches to house with short tunnel) so my question is now that i'm ready for a panel in the house, how should i do it. as a subpanel? i'd like to keep the current service panel in the garage also.that was part of the point. i will only use a few of the breaker spots though so there will be several open. i've included a picture to give a visual. i'd like to hear some ideas.

here is pic...


Last edited by iambuzzard; 04-27-08 at 08:34 PM.
Sponsored Links
Old 04-27-08, 08:27 PM
Unclediezel's Avatar
Join Date: Dec 2006
Location: Northeastern PA.
Posts: 2,230
Received 0 Votes on 0 Posts
Subpanel setup is definitely an option, Just remeber to keep the neutral and grounds separated at the sub. Discuss the necessity of GRound Rods with your local inspector. Being an attatched building May be a Judgement call.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes
Ask a Question
Question Title:
Your question will be posted in: