Quick follow-up question


  #1  
Old 12-21-11, 09:49 PM
R
Member
Thread Starter
Join Date: Dec 2011
Location: USA
Posts: 6
Received 0 Votes on 0 Posts
Quick follow-up question

Can someone verify that it's safe to connect two separate motion sensor outputs(120v) to one 120v transformer input? It's indicated online that it works but what if both sensors go on within the same time period?
 
  #2  
Old 12-22-11, 02:18 PM
Justin Smith's Avatar
Member
Join Date: Dec 2010
Location: Cressona, Pa, USA
Posts: 2,541
Received 0 Votes on 0 Posts
What are you trying to do?
 
  #3  
Old 12-22-11, 02:45 PM
P
Member
Join Date: Feb 2002
Location: port chester n y
Posts: 2,117
Received 0 Votes on 0 Posts
The line-leads of the two sensers must be connected to the same circuit-breaker ; if not , it's possible there would be 240 volts across the output-leads , or the circuit would be protected by two 15 amp CB's in parallel.
 
  #4  
Old 12-25-11, 11:10 AM
R
Member
Thread Starter
Join Date: Dec 2011
Location: USA
Posts: 6
Received 0 Votes on 0 Posts
Thank you for the good advice.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: