Quick follow-up question
#1
Member
Thread Starter
Join Date: Dec 2011
Location: USA
Posts: 6
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Quick follow-up question
Can someone verify that it's safe to connect two separate motion sensor outputs(120v) to one 120v transformer input? It's indicated online that it works but what if both sensors go on within the same time period?
#3
Member
Join Date: Feb 2002
Location: port chester n y
Posts: 1,983
Upvotes: 0
Received 0 Upvotes
on
0 Posts
The line-leads of the two sensers must be connected to the same circuit-breaker ; if not , it's possible there would be 240 volts across the output-leads , or the circuit would be protected by two 15 amp CB's in parallel.