Outdoor Motion Flood Light System


Old 03-24-13, 12:03 AM
Thread Starter
Join Date: Mar 2013
Location: USA
Posts: 1
Lightbulb Outdoor Motion Flood Light System

I am looking to set up a custom made outdoor motion activated security/flood light system. This will be installed around my house and yard. I would like to be able to have multiple lights and motion sensors in different locations. But I need all of the light to turn on at the same time if ANY of the motion sensors are triggered.

Can anyone give me an idea on how to achieve this? I am not looking for a pre build system as I would like to use my own custom lights.
Sponsored Links
Old 03-24-13, 12:14 AM
Join Date: Mar 2006
Location: Wet side of Washington state.
Posts: 18,372
Everything will need to be on a single circuit. Connect the red output wires of all the motion sensors together and to the black wires on all the light fixtures. All white wires connect together. All the black wires on the motion detectors connect together and to the black wire from the source of power.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes