unbonding sub panel
#1
Member
Thread Starter
Join Date: Nov 2013
Location: usa
Posts: 10
Upvotes: 0
Received 0 Upvotes
on
0 Posts
unbonding sub panel
Hi again
I have a main panel that is now a sub panel because of adding a main disconnect outside. when I change the wires back to neutral & ground bus some wire will be to short. is it a code violation to splice wires with wire nuts before
installing on bus?(to add length) the former owner had some net & grounds on same bus because this was the main panel before adding outside disconnect....
Thanks again G
I have a main panel that is now a sub panel because of adding a main disconnect outside. when I change the wires back to neutral & ground bus some wire will be to short. is it a code violation to splice wires with wire nuts before
installing on bus?(to add length) the former owner had some net & grounds on same bus because this was the main panel before adding outside disconnect....
Thanks again G