fan blower combo
#1
02-09-14, 10:45 AM
fan blower combo
i am going to move a light. exhoust fanand a vent blower, what to dowith the wires after i remove the swith is useing small wire nuts and tape them real good, i can get the wire from the fan combo real eazy, but power to the switch is up thru the walls on the 2nd story need some help thanks in advance bighammer
#2
02-09-14, 10:52 AM
Forum Topic Moderator
If the cables are being extended they will need to be in a permanently accessible junction box with cover. I would run a new cable from the switch to the fan unit.
