What is causing this and how to fix it?


  #1  
Old 10-22-14, 03:02 AM
G
Member
Thread Starter
Join Date: Oct 2011
Location: USA
Posts: 37
Upvotes: 0
Received 0 Upvotes on 0 Posts
What is causing this and how to fix it?

Every time I plug in my iron and do some ironing the lights in the room slightly dim. Today, I had a space heater plugged into a small old surge protector in the outlet and the outlet (or surge protector I’m not sure which) seemed like it was (for lack of better words), being jittery. It wasn’t sparking but it sounded like it was buzzing a little.

Is this a serious problem and if so how can I fix it? Is it costly to repair? My house was built in 1998 so it isn’t that old. Do I need another line run or re-wired? I’m totally at a loss with electrical stuff. I would appreciate any help anyone can provide. Thank you!
 
  #2  
Old 10-22-14, 03:20 AM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 36,607
Upvotes: 0
Received 9 Upvotes on 8 Posts
The dimming of the lights is mostly normal. Often lights and receptacles are on the same circuit (not preferred), which causes this short term "drain". As far as having the space heater plugged into a strip or extension cord, Don't. They aren't designed to be plugged into anything but a receptacle. Your surge protector was probably underrated for the load and was getting ready to break down.
 
  #3  
Old 10-22-14, 04:32 AM
pcboss's Avatar
Forum Topic Moderator
Join Date: Jul 2002
Location: Maryland
Posts: 13,976
Received 194 Upvotes on 170 Posts
The heavy loads like the iron and space heater can exacerbate a loose or failing connection. Flickering can be an indication that a problem is starting.
 
  #4  
Old 10-22-14, 04:37 AM
V
Member
Join Date: Mar 2002
Location: Bellefonte, PA
Posts: 208
Upvotes: 0
Received 0 Upvotes on 0 Posts
Thank you both for the very helpful replies! I appreciate it! I got rid of the surge protector. I noticed too the light on it was no longer green but red.

Do I need an electrician to come in and take a look at the outlets since the receptacles and outlets seem to be on the same line or should I be all right as long as I don't overload them? Is this an expensive fix?

Thank you both again!
 
  #5  
Old 10-22-14, 04:43 AM
pcboss's Avatar
Forum Topic Moderator
Join Date: Jul 2002
Location: Maryland
Posts: 13,976
Received 194 Upvotes on 170 Posts
Your breakers should trip if the load is too great.

New circuits to split up the load would require new wiring to be run.
 

Last edited by pcboss; 10-22-14 at 05:39 AM.
  #6  
Old 10-22-14, 05:30 AM
W
Member
Join Date: Feb 2006
Location: USA
Posts: 6,395
Received 63 Upvotes on 55 Posts
Circuits

You should not use a clothes iron and a space heater on the same circuit.
 
  #7  
Old 10-22-14, 06:04 AM
V
Member
Join Date: Mar 2002
Location: Bellefonte, PA
Posts: 208
Upvotes: 0
Received 0 Upvotes on 0 Posts
Thank you both for the follow up post! That helps! Thanks again!
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: