I have a 220 outlet in my garage that is fed from a sub-panel in the garage. Can I (Following all other safety precautions for back feeding my house, can I back feed to the main panel and power the rest of the house from the garage. I have a transfer switch already waiting to be installed, but we have bad weather headed this way and I have already lost power on sunny days.

Good Afternoon, I am new here and also a new homeowner. I just replaced all the outlets in my master bedroom. Before i replaced them all the outlets (5 of them) the bottom was operated by the switch. After replacing the outlets the top and bottom outlets are always on. Before you jump to conclusion yes i have searched and found that i need to remove the tab on the side of the outlet for the switch to be operational again. MY QUESTION is that do i need to remove that tab on ALL the outlets for the switch to operate the bottom sockets for each one or do i only need to do it the first one in the series? Thank you for your time and help, Tork