In Ontario, if I decide to put in a 100 amp Underground Service (to replace the existing overhead),I'm not clear where the demarkation point is. (At a cost) Does my Utility dig the trench,lay the conduit and fish in the cables ? I know they would do the connection on top of the power pole...... but who does the connection at the meter ? Does my Utility have to work with ESA to get approvals for the trench,conduit etc ? thanks

Replacing some smokes and just verifying what was hot (Yeah, I know, but not a single breaker is labeled and it would have taken me an hour just to find the right one. I undid and reconnected one wire at a time with the wires well separated out of the box.), but the readings kinda confused me. Hot to ground...97.4V. I thought, that can't be right. Different meter, same. Hot to neutral...120.3V, just fine. What would cause that? Any other time I've measured hot to ground anywhere, it was the same as hot to neutral. If you remember a prior post, where I said the place was wired by monkeys? I gave them too much credit. House wiring was stripped probably 1 1/4" in all the wirenutted connections. Smoke mounting plates held on with sheetrock screws to the box. Sheetrock screws!!!