Can anyone identity this fuse
#1
Can anyone identity this fuse
I need to replace a fuse but i cant find it online. I was hoping someone understood the numbers on it and could tell me which fuse i needed.
It is on a 120VAC line. It is ceramic.
Lf 20 A /500VP
And
505 c7 RU us. (the RU is large font and the R is backwards).
Thanks.
It is on a 120VAC line. It is ceramic.
Lf 20 A /500VP
And
505 c7 RU us. (the RU is large font and the R is backwards).
Thanks.
#4
Member
If you gave us the dimensions and a photo, we could probably give you a replacement part no that would work.
#6
I didnt include a photo because it is an inline fuse without an inline fuse holder. They soldered the wires to it, then it looks like they glued a sheet of rubber to it, then a heat shrink tube. By the time i hacked, wacked, slashed and tore through half of it so i could test it, it wasnt very pretty. I shattered it fighting to get the last bits off so i could read the numbers.
I dont see the button to attach a pic, but if i find it, i will attach what i have.
As for dimensions, i cant measure it now, but it looked like a standard 12V automotive size.
I dont see the button to attach a pic, but if i find it, i will attach what i have.
As for dimensions, i cant measure it now, but it looked like a standard 12V automotive size.
#8
That's a Littlefuse 505 series fuse.
littelfuse/media/electronics/datasheets/littelfuse_fuse_505_datasheet.pdf.pdf
Mouser is a god place to purchase it from. No minimum order and fast service.
0505020.MXP Littelfuse | Mouser
littelfuse/media/electronics/datasheets/littelfuse_fuse_505_datasheet.pdf.pdf
Mouser is a god place to purchase it from. No minimum order and fast service.
0505020.MXP Littelfuse | Mouser
#10
Hi, that appears to be a standard size fuse 1.25" long be 1/4" Dia , any inline fuse holder should work,as long as the voltage rating is greater than or equal to the circuit voltage.