Best way to collect/connect cat6/coax for distribution.


  #1  
Old 11-01-17, 01:05 PM
C
Member
Thread Starter
Join Date: Nov 2006
Location: San Francisco, CA
Posts: 155
Received 3 Votes on 3 Posts
Best way to collect/connect cat6/coax for distribution.

We have wired the whole house with cat6 & coax in every room. All of the cables end up at one spot in the garage- I'm wondering what is the cleanest/best way to manage them at that point. I was thinking I'd just put connectors on all the cat6 and plug them all into a switch that will be in that location. But then I saw this (see pic) box that everything runs neatly inside of. What is the purpose of doing like those pictures? Is there a benefit to having the cat6 cables end up as ports (instead of plugs)? That seems weird to me since you ultimately would need to patch them into a switch anyway so why have ports with a patch cable when I could just have connectors so the cables could go firectly to a switch?
 
Attached Images   
  #2  
Old 11-01-17, 01:11 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 70,065
Received 2,955 Votes on 2,666 Posts
Either way is effective. Many times I'll just crimp on RJ45 plugs for the customer. Be sure to get the proper crimp on plugs for cat. type solid wire.
 
  #3  
Old 11-01-17, 01:28 PM
F
Member
Join Date: Mar 2006
Location: Wet side of Washington state.
Posts: 18,495
Received 36 Votes on 28 Posts
Plugs on solid conductors can be problematic, especially if they are removed and reconnected periodically.

That picture shows how NOT to install Cat.6 wiring. You need to keep the individual pairs tightly twisted all the way to the connectors. Having that much extra cable, and especially with the outer jacket removed, is poor workmanship in my opinion.
 
  #4  
Old 11-01-17, 01:43 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 70,065
Received 2,955 Votes on 2,666 Posts
Plugs installed and crimped correctly are reliable. The key being correctly installed. You can get generic punch down blocks and mount them to your own backboard. If you go this route.... you'll need a genuine punch down tool. Not that plastic tool they offer. If this type of product isn't installed correctly you will have nothing but poor service and headaches.

One type of block...
Leviton-49255-Q89-QuickPort-Mounting-Separately/dp/B003AU3ITM/
 
  #5  
Old 11-01-17, 05:28 PM
pcboss's Avatar
Forum Topic Moderator
Join Date: Jul 2002
Location: Maryland
Posts: 15,389
Received 148 Votes on 131 Posts
Looks like someone was never trained how to properly punch down a twisted pair cable. Likely it would be easy to fix.
 
  #6  
Old 11-02-17, 08:15 AM
I
Forum Topic Moderator
Join Date: Feb 2005
Location: Near Lansing, Michigan
Posts: 10,941
Received 45 Votes on 43 Posts
Yeah awful job on that picture, but for virtually all residential applications simply crimping male plugs on the UTP cable and plugging straight in to your router/modem/switch device will be fine. The structured wiring stuff gets expensive quickly, introduces potential points of failure, and it doesn't really gain you anything. How often do you move and reconfigure the rooms in your house? It's not like an office building where people change cubes frequently and the wiring needs to be repatched. Further, no residential grade devices utilize the capacity of cat6/7 buying all those keystones and patch blocks and cords is a waste of money and time.

The upside is that it looks cool when done well.
 
  #7  
Old 11-04-17, 02:44 PM
Z
Forum Topic Moderator
Join Date: Sep 2005
Location: USA
Posts: 6,295
Received 319 Votes on 285 Posts
I'll agree with others. In an office with hundreds of ports, patch panels make more sense. In a residential environment, I'd just crimp ends on the cables. I use a 24x24" or larger piece of plywood on the wall to mount the network switch, coax splitter, modem, etc. and use metal U-brackets and zip ties to neatly route the wires. It's cheap, neat and easy. And reconfigurable if or when needed.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: