GFCI in laundry

Reply

  #1  
Old 08-08-19, 07:40 AM
T
Member
Thread Starter
Join Date: Oct 2005
Location: USA
Posts: 1,693
Received 47 Votes on 46 Posts
GFCI in laundry

what is the latest NEC on laundry GFCI protection. No sink and is in finished space. TIA.
 
  #2  
Old 08-08-19, 09:17 AM
N
Member
Join Date: Jan 2012
Location: Canada
Posts: 2,743
Received 18 Votes on 16 Posts
" Where receptacles are placed within 6 feet of the outside edge of the sink, they require GFCI protection. "

Keep in mind, the washing machines tend not to work well with them due to the motors.

Here (Ontario Canada) I tend to use GFCI protected circuit within 1M (~1 yard) of a water source, excluding motor driven items (washing machine, etc).
 
  #3  
Old 08-08-19, 09:27 AM
A
Member
Join Date: Jun 2012
Location: USA
Posts: 1,650
Received 48 Votes on 43 Posts
NEC now requires GFCI protection on 125v receptacles for "Laundry areas."
 
  #4  
Old 08-08-19, 09:53 AM
N
Member
Join Date: Jan 2012
Location: Canada
Posts: 2,743
Received 18 Votes on 16 Posts
NEC now requires GFCI protection on 125v receptacles for "Laundry areas."
Does this include white appliances?

Might also want the definition of "Laundry area".
I suspect its something like 1 meter from edge of water source.

Edit:
Asking as I look at my own laundry room which is ~20ft long by ~12ft.

I'm a bit rusty with my Ontario Electrical code for residential as I gave up on my apprenticeship in 2016 and moved over to Alarms and low voltage automation,
 
  #5  
Old 08-08-19, 10:19 AM
A
Member
Join Date: Jun 2012
Location: USA
Posts: 1,650
Received 48 Votes on 43 Posts
Nothing in the definition section of NEC but later describes as "areas designated for the installation of laundry equipment." Nothing to do with water or sinks? Something else for the inspector/Authority Having Jurisdiction. Canadian codes may be just as murky.
 
  #6  
Old 08-08-19, 10:33 AM
N
Member
Join Date: Jan 2012
Location: Canada
Posts: 2,743
Received 18 Votes on 16 Posts
Nothing in the definition section of NEC but later describes as "areas designated for the installation of laundry equipment." Nothing to do with water or sinks? Something else for the inspector/Authority Having Jurisdiction. Canadian codes may be just as murky.
The Canadian Electrical tends to be NEC with some modification/adjustments.
The Ontario Electrical is the Canadian Code modified/adjusted slightly. They all need to have their hand in there.

When I finished my schooling for electrical in 2015, there was pretty solid definitions as to how far (min/max) when it came to GFCI, AFCI, etc.

For Laundry, I'd say put a GFCI at the start of the regular receptacle circuit in the Laundry room. Highly doubtful one will be required for the washer and dryer (aka white appliance).
Now that all being said, AFCI might through a curve ball on the standard receptacles. I was into low voltage home automation when this blew up so I'm not confident enough to discuss this aspect. AFCI was only required in Bedrooms when I was current
 
  #7  
Old 08-08-19, 02:43 PM
pcboss's Avatar
Forum Topic Moderator
Join Date: Jul 2002
Location: Maryland
Posts: 15,223
Received 104 Votes on 90 Posts
Keep in mind, the washing machines tend not to work well with them due to the motors.
The UL standards limit the leakage current well below the trip levels for a gfi. There should be no issues. I wish this myth would die.
 
  #8  
Old 08-09-19, 06:44 AM
I
Forum Topic Moderator
Join Date: Feb 2005
Location: Near Lansing, Michigan
Posts: 10,943
Received 44 Votes on 42 Posts
GFCI has been required for 125V receptacles in "Laundry Areas" since the 2014 NEC, regardless of distance to a water source or whether the room is finished. Prior to 2014, the requirement was within 6' of a laundry sink or if the area was unfinished, with a few conditional exceptions that could remove the GFCI requirement.
 
  #9  
Old 08-10-19, 05:02 AM
C
Member
Join Date: Mar 2007
Posts: 1,907
Received 122 Votes on 97 Posts
What about the dryer receptacle?
 
  #10  
Old 08-10-19, 05:21 AM
pcboss's Avatar
Forum Topic Moderator
Join Date: Jul 2002
Location: Maryland
Posts: 15,223
Received 104 Votes on 90 Posts
The gfi protection is only required for 120 volt receptacles.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: