how to get blade bolt and washer for craftsman C/M/S?


Old 10-30-04, 11:45 AM
Banned. Rule And/Or Policy Violation
Thread Starter
Join Date: Oct 2004
Posts: 120
how to get blade bolt and washer for craftsman C/M/S?

hey all i have a good working and good shape 8 1/4" craftsman compound miter saw that i dont have the bolt and washer for the blade motor shaft, they are missing, i tried bolt and washer from my 7 1/4" circular saw and its bolt and washer are too big diameter

what do i do ?
there are no model numbers on the compound miter saw anywhere just a craftsman label

thanks for anything

[email protected]

Forum Monitors Note:
This post has been edited.
E-mail address only removed.
Kindly use the forum topics only, to exchange information.
Email contact addresses are not allowed in the forum topics.

Web Site Host & Forums Monitor.

Last edited by Sharp Advice; 11-21-04 at 10:03 AM.
Sponsored Links
Old 11-21-04, 04:44 PM
Visiting Guest
Posts: n/a
Smile Blade bolt & washer

Call the Sear's 800 number with your model number of the saw, and they'll ship one out to you. I've ordered numerous parts from them that way.
Old 11-22-04, 06:46 AM
Dave_D1945's Avatar
Join Date: Dec 2003
Location: Bay Area, CA
Posts: 1,178
Since you don't have the model number this might be a problem. I would call the Sears 800 number and be ready to give them a good description of your saw. It probably isn't too old and I would suspect that those parts were used on several models.
Old 12-08-04, 12:35 AM
Visiting Guest
Posts: n/a
By me ( in So California ) in the next town over (San Bernardino)
there's a Sears parts store.
Maybe you can find one by you and bring the saw with you so they can indentify it?
Old 12-09-04, 07:02 AM
Join Date: Oct 2004
Posts: 51
Trying to visualize your problem. If the blade arbor's still there, could you measure its diameter and thread pitch then go to the hardware store and buy a nut and washer? Pure speculation.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes