Source for table saw switch?
#1
Member
Thread Starter

I bought a used Craftsman table saw from which the owner had removed the on-off power outlet switch. Sears parts says this part is no longer available.
Does anyone know of an after-market or used parts source for these? My saw is model no. 113.298761; the original power outlet switch was mounted very conveniently--right up front, hanging from the front rip fence guide bar; the switch operates a receptacle that the 3-prong motor plug goes into. I would particularly like to locate one of these, or a substitute that could hang about this same place.
Thanks, Gary
Does anyone know of an after-market or used parts source for these? My saw is model no. 113.298761; the original power outlet switch was mounted very conveniently--right up front, hanging from the front rip fence guide bar; the switch operates a receptacle that the 3-prong motor plug goes into. I would particularly like to locate one of these, or a substitute that could hang about this same place.
Thanks, Gary
Last edited by GaryMN; 09-25-05 at 09:20 AM. Reason: add detail and accuracy
#3
Here is one
#5
#7
Originally Posted by mango man
I have used a J box and a standard light switch as a replacment for power tool switchs
cheap and readly availible
cheap and readly availible