Buying a pneumatic nailer
#1
Member
Thread Starter
Join Date: Oct 2005
Posts: 411
Received 0 Votes
on
0 Posts
Buying a pneumatic nailer
Im considering buying a floor nailer for my job. Its about 330 square feet and Im guessing it may take me more than 2 days. If I spill over into the third day, thats about $120 in rental costs for the nail gun (abot $40 a day)
Im wondering if I should buy one and then sell it on ebay.. not thrilled with that idea because Im concerned that I wont be able to offload it and Im stuck with a 300 or 400 dollar gun Ill never use again.
So, at Harbor Freight I see this gun:
http://www.harborfreight.com/cpi/cta...emnumber=93197
certainly a cheap one... but do you think its worth buying?
Any thoughts out there?
Im wondering if I should buy one and then sell it on ebay.. not thrilled with that idea because Im concerned that I wont be able to offload it and Im stuck with a 300 or 400 dollar gun Ill never use again.
So, at Harbor Freight I see this gun:
http://www.harborfreight.com/cpi/cta...emnumber=93197
certainly a cheap one... but do you think its worth buying?
Any thoughts out there?
#3
Member
Join Date: Nov 2005
Posts: 1
Received 0 Votes
on
0 Posts
Floor Nailing Staples vs Nails

Originally Posted by duneslider
We bought one as a back up while we had a couple being repaired and it seems to be holding up quite well. We have used it on several thousand square feet without any problems yet.
Later
Bryan
Later
Bryan