Craftsman Table Saw Question

Old 05-13-10, 07:59 AM
Thread Starter
Join Date: Sep 2009
Location: Columbus, Ohio
Posts: 8
Upvotes: 0
Received 0 Upvotes on 0 Posts
Craftsman Table Saw Question

I recently purchased a used craftsman table saw and did not take the time to look at the attachment of the top to the base. Is the top easy to remove from a contractors type saw for moving? the saw is very similar to this one.

Thanks for any experiences with this
Old 05-13-10, 09:06 AM
Join Date: Aug 2006
Location: santa fe /texas
Posts: 947
Upvotes: 0
Received 0 Upvotes on 0 Posts
don't know about removing the stand.
I,with a helper-turn it upside down on a sheet of plywood in the P.U. bed.
Old 05-13-10, 03:58 PM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 36,608
Upvotes: 0
Received 9 Upvotes on 8 Posts
Congratulations on your recent investment. Lower the blade and transport it either on its top or its side. They are pretty tough. Just don't go hill jumping before you get it home. And forget about getting it through a 3-0 x 6-8 door opening. Hope you are putting it in a shop or garage.

Thread Tools
Search this Thread
Ask a Question
Question Title: