Ryobi saw fence replacement

Old 05-24-17, 08:00 PM
Thread Starter
Join Date: Feb 2015
Posts: 256
Upvotes: 0
Received 0 Upvotes on 0 Posts
Ryobi saw fence replacement

I have on of those 100 dollar ryobi table saws from 10 years ago. THey have a fence that is so useless it is not even worth using. total crap.
has anyone found an aftermarket fence including the sliding groove that will mount on these saws and work well???? oor have you made a wooden fence for this exact saw??
how did you mount it???
Old 05-25-17, 03:47 AM
Forum Topic Moderator
Join Date: Mar 2005
Location: USA - N.E.Tn
Posts: 45,409
Received 785 Upvotes on 688 Posts
Not near as handy but you could clamp a fence in place. That's what I've done on my table saw after the fence broke ...... one of many things I need to take care of one of these days
Old 05-25-17, 04:08 AM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 36,608
Upvotes: 0
Received 9 Upvotes on 8 Posts
You mention "sliding groove". Are you talking about the fence or the slide that goes in the table groove?
Old 05-25-17, 12:21 PM
Thread Starter
Join Date: Feb 2015
Posts: 256
Upvotes: 0
Received 0 Upvotes on 0 Posts
sliding groove is the thing with the cam clamp on it. not the miter slot.
this piece of junk doesnt even have miter slots.
Old 05-25-17, 02:27 PM
pugsl's Avatar
Forum Topic Moderator
Join Date: Mar 2008
Location: United States
Posts: 8,161
Received 77 Upvotes on 70 Posts
I forgot the brand I mounted on my Craftsman saw a couple of years ago but here are a selection
Made a fairly cheap saw much better.
Old 05-25-17, 03:21 PM
the_tow_guy's Avatar
Group Moderator
Join Date: Feb 2001
Location: SW Fla USA
Posts: 12,058
Received 198 Upvotes on 158 Posts
Kind of depends on how much you want to spend. Like pug, I mounted an aftermarket fence on my 60+ year old Delta-Rockwell Homecraft saw. Way better than the original. Mine's a Mule Accusquare.

Thread Tools
Search this Thread
Ask a Question
Question Title: