DW998 Hammer Drill


  #1  
Old 02-11-18, 11:09 AM
4
Member
Thread Starter
Join Date: Feb 2018
Location: U.S.A.
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
DW998 Hammer Drill

Hi Guys,
This the first time have used this site so not sure if in the right place ??. Had to clean the inside of my hammer drill the other day and after cleaning a spring came out ( 144658-00 spring ). Managed to track it, and it is from The Shifter switch ?? Have been trying to look at exploded diagrams and look for videos, but can't seem to find anything to help ... Know where the shifter switch is and just need some help in placing back in place ..
Thanks
 
  #2  
Old 02-11-18, 11:23 AM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Posts: 27,102
Received 1,919 Upvotes on 1,723 Posts
Part #10 looks like it sits in an indentation on the shifter switch itself.

https://www.ereplacementparts.com/de...1162_2441.html
 
  #3  
Old 02-11-18, 11:45 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 65,065
Received 3,973 Upvotes on 3,566 Posts
Welcome to the forums.

It looks like the spring just sits in an indentation on the back of the slide switch.
Hard to be of more help but I can't find any views of the back of the slide switch.
 
  #4  
Old 02-12-18, 05:34 AM
4
Member
Thread Starter
Join Date: Feb 2018
Location: U.S.A.
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
Thanks a lot, for your help,
will have another attempt when I come back
 
  #5  
Old 02-13-18, 05:05 AM
4
Member
Thread Starter
Join Date: Feb 2018
Location: U.S.A.
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
I Found it, and thanks very much for your advice.... I feel complete again with my 18 volt hammer drill haha ....
Thanks again guys ..
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: