Looking for a very small slot-cutter
#1
Hello,
I am looking for a 1/32" Kerf, 3-wing slot cutter with a 1/4" shank. Has anyone heard of a bit that will cut a slot this small? Your help would be very much appreciated.
Regards,
Terri
I am looking for a 1/32" Kerf, 3-wing slot cutter with a 1/4" shank. Has anyone heard of a bit that will cut a slot this small? Your help would be very much appreciated.
Regards,
Terri
#2
Terri,
I looked through a number of my catalogs and the smallest kerf I found was 1/16 inch, 1/4 shank. Depending on your application, you may find a dremel type blade to cut the 1/32in. kerf. You could try amanatool.com
I looked through a number of my catalogs and the smallest kerf I found was 1/16 inch, 1/4 shank. Depending on your application, you may find a dremel type blade to cut the 1/32in. kerf. You could try amanatool.com