Table saw arbor, Has a bit of play.

Reply

  #1  
Old 11-03-19, 12:43 PM
biketrax's Avatar
Member
Thread Starter
Join Date: Jan 2008
Location: USA
Posts: 371
Received 1 Vote on 1 Post
Table saw arbor, Has a bit of play.

So I have a bigger Craftsman contractor saw that runs great I keep a nice 10 inch blade on it for most of my heavier cutting. I use a small sears lightweight direct drive saw i keep in a shelter outside for most of everything else. Although it can handle a 10 inch blade i use an 8 inch thinner blade which makes cutting small pieces a bit safer and comfortable. I believe i have heard it said to taming down your saw? However I recently noticed a small bit of play in the arbor. I haven't really did any exploring yet, I thought i would ask if any body knows of an adjustment for that kind of side ways play ?
thanks all
 
Sponsored Links
  #2  
Old 11-03-19, 03:36 PM
XSleeper's Avatar
Group Moderator
Join Date: Dec 2004
Location: USA
Posts: 23,366
Received 227 Votes on 209 Posts
There is no adjustment in a bearing that allows end play.
 
  #3  
Old 11-03-19, 08:21 PM
GregH's Avatar
Super Moderator
Join Date: Jan 2001
Location: Manitoba
Posts: 10,016
Received 13 Votes on 13 Posts
I agree.
If this is a belt drive saw the arbor bearing would need to be replaced.
Some nearings are permantly pressed into the arbor and some can be replaced.

Just make sure the bearing has not spun in the arbor.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description: