I have a Milwaukee fuel 1/4" impact driver and hammer drill. A non fuel sawzall. I want to get a circ saw, 1/2" impact and 1/4" or 3/8" ratchet. The sales they have on the non fuel combo sets at HD are pretty good deals. They don't have combos on the fuel in what I want. Unless they put fuel combos on sale later. I've heard arguments on both sides whether to get fuel or non fuel. They will be for home use and not used often. Any recommendations on which way to go?

Picked up a new Ryobi 10" table saw to make an advent calendar for the kids my cuts came out pretty badUsing a 50 th Diablo blade cutting 1/2" thick poplar clamped 4 deep. My blade seems wobbly front to back / left to right Took off the blade cleaned up the arbor and " washers" and tightened a bit more than. Finger tight. Still get this wobble noise. In the 2nd video u can se as I rotate the arbor it makes this noise Is this normal ? The wood cut below is an example how I clamped 4 across. And the test scrap I used but as you can see it's a horrible cut https://photos.app.goo.gl/dke1p5QKfrXDiVdD7 https://photos.app.goo.gl/aDbMJV2QsUccAUnC6 https://photos.app.goo.gl/bE7cZGZLNn22t24h6 Any thoughts ? Ps blade was new when used ​​​