vista-20p "fire trouble 01"


Old 06-19-05, 06:11 AM
Visiting Guest
Posts: n/a
vista-20p "fire trouble 01"

New to alarms. Keypanel says "fire trouble 01". I have no fire detectors only 5 montion detectors. I have tried to put EOLR on 8&9 and 10&11 terminals but "fire trouble" still appears on display. I Thank You in advance.

This may be the first of many posts.
Sponsored Links
Old 06-19-05, 02:46 PM
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,089
Upvotes Received: 21
Until you change the default programming on the zone, it will keep doing this every time the zone opens (someone triggers the motion).

In addition, ademco panels do not automatically clear troubles, you have to enter the disarm (code + 1) keystrokes to clear the trouble memory, even after putting a dummy resistor on the zone terminals.
Old 07-03-05, 04:43 AM
Visiting Guest
Posts: n/a
As always you were right agian. It is up and running and working fine.
Thanks agian.


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes