ok let me try and make this as short as i can...... I have a ADT Pro 3000EN security system which ADT monitors and i pay them each month. i think its also ref to as then vista 20p?? am i right??? anyway the problem is that my dad rewired all the phone lines and to make it short now i have a comm failure message on my keypad??? i dont know about how to wire a rj31x phone jack(if thats the jack that adt used in my system that is?) so a dont know where to problem is? i think its at the other end of the phone line but he connected the phone line to the end of the wire that adt put in so everything looks ok? i tested the dailtone in the rj31x jack and the black and red wire pair had a dail tone using a dailtone tester i have? oh and the 2 pair wire adt used has black, red, yellow, blue colored wires so the back replaces the green wire which is connected at the end of the phone line to the active phone line so u will see a back wire connect to the main red wire. i started playing around with the jack and plipping the wires around and nothing, it looks like the wires loop at the rj31x jack and i have know idea why so thats why i cant fix whatever my dad did wrong and put it back to how it was when adt wired it so now it prob doesnt even signal adt saying my alarm went off!!! can anyone help me i know there is a trick to wiring a rj31x jack, what is the trick and what do i do at the end of the phone line to the 2 pair red back, yellow and blue wires? or lets say just the blue and yellow wires because they are just deconnected at the end???? :wall:

I just moved to my house, and I have an ADT Focus 32 and DSC 832 Panels installed and a large amount of sensors like maybe 6+ Well I have a few problems if someone can help me. I moved in and was never told what the key code is, I want to reset if it. And we lost power in the house and the trouble light is always [B]ON[/B] (well I think this is what did it, it might be me unpluging it I dont know) If im missing anything please contact me Reset PassCODE Turn off TROUBLE LIGHT Also thats for reading this... and for the help in advance... Im completely new to this stuff and dont feel the need to call a company up and pay them for something I can probably do... Thanks again