Moving Motion From One Zone to Another Motion Zone

Reply

  #1  
Old 06-09-06, 04:01 PM
Member
Thread Starter
Join Date: Jun 2006
Posts: 1
Received 0 Votes on 0 Posts
Moving Motion From One Zone to Another Motion Zone

Hello Everyone,

ADT came out today to install an additional wired motion detector for my SafeWatch Pro 3000. Before, we had 2 motions and they are each on their own zone. Now we have 3 motions but he put the new one on a motion zone we sometimes bypass.

Could I simply move the new motion from the zone we like to bypass to share the other motion's zone or does it require additional programming on the keypad as well?

Hope this makes sense!
 
Sponsored Links
  #2  
Old 06-09-06, 07:52 PM
Forum Topic Moderator
Join Date: Jun 2000
Location: Gainesville, FL, USA
Posts: 16,168
Received 25 Votes on 24 Posts
No, it shouldn't be a problem. The zone programming only knows that there is a normally closed loop attached. If you look at how they did the wiring on the zone that it's on, and copy that on the zone you want to move it to, you will be fine.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question
Question Title:
Description:
Your question will be posted in: