DSC 632 Wireless Smoke not alarming
#1
Member
Thread Starter
Join Date: Sep 2008
Location: Boston
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
DSC 632 Wireless Smoke not alarming
I have a DIY DSC 632 Panel with RF Keypad, which works great for security, water and smoke protection. I have had one wireless smoke detector on zone 4, and it works well.
I recently added another smoke detector (DSC4916) onto zone 9. It installed fine and passed the range test, but... it will not sound the alarm when I test it. The smoke detector on zone 4 works fine. What am I missing? Must I install a zone expansion module even though it's a wireless device?
Thanks in advance,
Joseph
I recently added another smoke detector (DSC4916) onto zone 9. It installed fine and passed the range test, but... it will not sound the alarm when I test it. The smoke detector on zone 4 works fine. What am I missing? Must I install a zone expansion module even though it's a wireless device?
Thanks in advance,
Joseph