Date/Time setup issue on pc1555mx / 5501z keypad
#1
Member
Thread Starter
Join Date: Oct 2008
Location: East Coast USA
Posts: 10
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Date/Time setup issue on pc1555mx / 5501z keypad
I can't seem to get the date/time reset. Here's what happens
[8][6][master coder] a beep follows - is this correct
I then continue to enter date and time in following format
[1][nnnn][mmddyy] however I get another beep after the 1 number of the time numbers.'
e.g.
[1][161 beep 5] which isn't correct.
Anyone know the answer?
Thanks
[8][6][master coder] a beep follows - is this correct
I then continue to enter date and time in following format
[1][nnnn][mmddyy] however I get another beep after the 1 number of the time numbers.'
e.g.
[1][161 beep 5] which isn't correct.
Anyone know the answer?
Thanks