Hardwiring Shatterpro Sensor to Simon xt
#1
Member
Thread Starter
Join Date: Aug 2013
Location: usa
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Hardwiring Shatterpro Sensor to Simon xt
What contacts on the XT panel do I use to hardwire the shatterpro sensor?
#2
Forum Topic Moderator
From the XT installer manual: http://www.safemart.com/docs/support...ion-Manual.pdf
Basically, it won't work (at least not properly). If you want a glass break with a Simon, you need to use the wireless model.
Note: Connect only normally closed (NC) reed switches to HW1 I/O and/or HW2 in. Other types of hardwired detectors should not be used.